|
|
|
|
MIB Information: x25gwCmd
1.3.6.1.4.1.429.1.11.2
MIB Information: x25gwCmdTable
1.3.6.1.4.1.429.1.11.2.1
not-accessible
Description: The X.25 Card Command table contains an entry for each of the manageable X.25 Cards in the chassis. It provides a means through which to take specific actions on one or more X.25 cards in the NAS chassis. The number of entries in this table is given by the value of x25gwIdNumber.
MIB Information: x25gwCmdEntry
1.3.6.1.4.1.429.1.11.2.1.1
not-accessible
Description: There is one X.25 Card Command entry per X.25 Card in the chassis.
MIB Information: x25gwCmdIndex
1.3.6.1.4.1.429.1.11.2.1.1.1
mandatory read-only
Description: A unique value for each X.25 Card in the chassis. The value of this object matches the value of the index of the corresponding X.25 Card's entry in the entity table of the chassis MIB.
Settings: INTEGER
MIB Information: x25gwCmdMgtStationId
1.3.6.1.4.1.429.1.11.2.1.1.2
mandatory read-write
Description: This object is a generic read-write variable that a Management Station (MS) can use to guarantee that the results from a given command are the results of a command issued by that specific MS. Each MS must SET a unique value to this object when doing commands and GET the value of this object together with x25gwCmdReqId and x25gwCmdResult to detect interference from other MSs.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 8
MIB Information: x25gwCmdReqId
1.3.6.1.4.1.429.1.11.2.1.1.3
mandatory read-only
Description: This object contains the value of the request-id field in the SNMP PDU which invoked the current or most recent command or test on this X.25 Card. If the request-id is unknown or undefined this object contains the value zero.
Settings: INTEGER
MIB Information: x25gwCmdFunction
1.3.6.1.4.1.429.1.11.2.1.1.4
mandatory read-write
Description: This object contains a value which describes the command which is being invoked.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = noCommand
(2) = saveToNVRAM
(4) = restoreFromDefault
(5) = nonDisruptSelfTest
(6) = disruptSelfTest
(7) = softwareReset
(8) = downloadCfgFile
(9) = uploadCfgFile
MIB Information: x25gwCmdForce
1.3.6.1.4.1.429.1.11.2.1.1.5
mandatory read-write
Description: In some cases the X.25 Card may be in a state such that certain commands could adversely affect connections. In such cases a command request with this object not present or set to noForce will result in a warning. If the operator elects to ignore such warnings this object can be set to force in a subsequent issue of the command to cause the command to be carried out regardless of its potentially hazzardous effects.
Settings: INTEGER
MIB Information: x25gwCmdParam
1.3.6.1.4.1.429.1.11.2.1.1.6
mandatory read-write
Description: This object contains parameters that are specific to the particular command being issued. In some cases there will be no aditional parameters required.
Settings: OCTET STRING
MIB Information: x25gwCmdResult
1.3.6.1.4.1.429.1.11.2.1.1.7
mandatory read-only
Description: This object contains the result of the most recently requested command or test or the value none(1) if no commands have been requested since the last reset.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = none
(2) = success
(3) = inProgress
(4) = notSupported
(5) = unAbleToRun
(6) = aborted
(7) = failed
MIB Information: x25gwCmdCode
1.3.6.1.4.1.429.1.11.2.1.1.8
mandatory read-only
Description: The Value of this object is value of this object is noError(1) if the command was successful and indicates a further description of what went wrong if it was unsuccessful.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = noError
(2) = unable
(6) = unrecognizedCommand
(8) = slotEmpty
(12) = noResponse
(20) = unsupportedCommand
(22) = deviceDisabled
(46) = fileTooBig
(58) = userInterfaceActive
(61) = badFlashRomID
(62) = badFlashVoltage
(63) = flashEraseError
(64) = eraseSequenceError
(65) = eraseExecutionError
(66) = receiveBufferOverflow
(68) = badProgramVoltage
(69) = programmingDataError
(70) = programCodeError
(71) = invalidCodeError
(72) = romCrcBad
(73) = pendingSoftwareDownload
(74) = ramCrcBad
(75) = invalidRomId
(84) = cardIdMismatch
(85) = cardIdUnknown
(86) = tftpTimeout
(87) = flashEraseTimeout
(88) = invalidFileHeader
(93) = bulkTransferInProcess
Copyright © 2000 3Com Corporation.